Paper Towel Dispenser & Waste Receptacle (Recessed)

TWU-100

Mounting: Recessed
Capacity: Uses Standard 475 Multi-Fold or 350 C-Fold Paper Towels & 2 Gallon (7.6L) Waste Capacity
Material: #304 Satin Stainless Steel
Overall Dimensions: 14” W x 28” H x 4-1/4” D (356mm x 711mm x 107.3mm)
Wall Cut Out: Min. of 12-1/2” W x 26-1/2” H x 4” D (317.5mm x 673.1mm x 101.6mm)

Tech Data Sheet Accessories Catalog

Product Details

SPECIFICATION
Recessed Paper Towel Dispenser & Waste Receptacle shall hold and dispense 350 C-fold or 475 multi-fold paper towels and shall have a waste capacity of 2 gallons (7.6 L). Door and cabinet shall be fabricated of 22-gauge type 304 stainless steel; all exposed surfaces shall have #4 satin finish and be protected during shipment with a PVC film that shall be easily removable after installation. Heavy duty, full length, stainless steel piano type hinge. Towel dispensing shall be held closed with a tumbler lock keyed. Towel dispensing slot shall have a fully hemmed/deburred edges to prevent injury and towel tearing. Waste receptacle shall have hemmed edges for service removal and maintenance safety. Structural assembly of body and door components shall be of fully welded construction. Overall Dimensions: 14” W x 28” H x 4 1/4” D (356mm x 711mm x 107.3mm).

Recessed Paper Towel Dispenser & Waste Receptacle shall be Model #TWU-100 of Metpar Corporation, 95 State Street, Westbury, NY 11590.

OPERATION
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Waste container is removable and is emptied manually on cycle determined by maintenance needs.

INSTALLATION
Make sure cabinet will sit flush in wall. Remove waste bin during installation. Unit is recessed mounted in wall using No 10 self-tapping screws (provided by others) through concealed mounting holes provided in the rear panel and side panels. Install waste bin back into cabinet and load paper towels. Coordinate with architect & contractor to prevent interference with internal wall utilities.

Rough Wall Opening required: 12-1/2” W x 26-1/2” H x 4” D. minimum.