Surface Mounted Paper Towel Dispenser & Waste Receptacle shall hold and dispense 350 C-fold or 475 multi-fold paper towels and shall have a waste capacity of 2 gallons (7.6 L). Door and cabinet shall be fabricated of 22-gauage type 304 stainless steel; all exposed surfaces shall have #4 satin finish and be protected during shipment with a PVC film that shall be easily removable after installation. Heavy duty, full length, stainless steel piano type hinge. Towel dispensing shall be held closed with a tumbler lock keyed. Towel dispensing slot shall have a fully hemmed/deburred edges to prevent injury and towel tearing. Waste receptable shall have hemmed edges for service removal and maintenance safety. Structural assembly of body and door components shall be of fully welded construction. Overall Dimensions: 14” W x 28” H x 4 3/8″ D (356mm x 711mm x 111mm).
Surface Mounted Paper Towel Dispenser & Waste Receptacle shall be Model #TWU-100-SM of Metpar Corporation, 95 State Street, Westbury, NY 11590.
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Waste container is removable and is emptied manually on cycle determined by maintenance needs.
Make sure cabinet will sit flush on wall. Slip collar on back of cabinet. Remove waste bin during installation. Unit is surface mounted on wall using No 10 self-tapping screws (provided by others) through concealed mounting holes provided in the rear panel and side panels. Install waste bin back into cabinet